Know When it’s Time for Circuit Breaker replacement

commercial electrician in atlanta ga

While it may fail to cross your mind, replacing your circuit breaker is essential to a smooth running home. By routinely replacing your circuit breaker, you can avoid damaging your appliances and minimize your chances of having an extended power outage.

Additionally, since they are often located in less visible areas, you may not realize when an issue with a panel has formed, which could mean a disaster for your home!

Not replacing your circuit breaker can cause flickering lights, poor performance, and more. Here are the key elements you should look out for to know when to replace your circuit breaker:

Burning Smell

If you’ve begun to notice a burning smell coming from your panel or your home in general, it most likely means that you have overheated insulation and wiring. This is an issue that requires you to replace your circuit breaker immediately, as it means your insulation is failing to protect your home from shortages.

In the case of a burning smell, you should turn off your main power immediately and get your circuit breaker replaced

Physical Damage

One of the most dangerous occurrences with circuit breakers is a degraded or melted wire. A melted wire, which can be recognized through scorch marks around the breaker, is a potential fire hazard. Since breakers are responsible for electricity in the entire house, a melted wire can potentially put your whole home in flames.

In this case, it’s essential that you get your circuit breaker replaced.

Old Age

Sometimes it’s not a burning smell or a melted wire which is putting your house at risk – often times it’s simply that your circuit breaker has been installed for too long and is at an increased likelihood of failure. Your circuit breaker should be inspected around every ten years, as this is when they are likely to begin to fail or falter in quality.

Regular Breaker Tripping

Breaker trips are intended to save your home from too much power being drawn in. However, many people have encountered that a simple appliance such as a microwave or a vacuum has been the piece that tips your breaker over the edge to trip.

If you find that a breaker trips every time you use a specific plug or appliance, your circuit breaker is at a much higher risk of failure and should be replaced to protect your home.

Conclusion

Circuit breakers are often tucked away under the stairs or in a low visibility location, which leads lots of people to forget that they lie at the heart of electricity in your home. Since running safe electricity is essential for home life, it’s always vital to get your circuit breaker checked or replaced if you encounter any issues.

If you’ve noticed a burning smell, physical damage, old age, or regular breaker tripping occurring within your circuit breaker, then it may just be time to swap it in for a new one or at least have it checked! See our Google Reviews and Call us today if you have questions about your circuit panel.

How to Choose the Best Under Cabinet Lighting for Your Kitchen

cabinet lighting

Cabinets can be a nightmare when it comes to blocking light. You’ll know the struggle all too well If you’ve dealt with trying to cook under a cabinet and failing to see what’s going on clearly! Luckily there is a solution: with the help of a trusted Atlanta electrical contractor, you can find the perfect under-cabinet lighting or your kitchen which will give you the light you need to follow recipes and cook in peace.

If you need more info on the best under-cabinet lighting for your kitchen, we’re here to help! Here are some types of under-cabinet lighting and where they’re best suited:

Battery Powered Under Cabinet Lights

If you’re looking for a lighting solution that can be installed just about anywhere, then battery-powered under-cabinet lighting may be the thing you’re looking for. Since they’re battery-powered, they’ll work even the powers out! However, you will have to deal with possible faulty batteries and replacements, which may be more hassle than you’ve bargained for – if that sounds like a drawback to you, maybe consider other options.

Hardwired LED Under Cabinet Lighting

With the help of a trusted Atlanta electrical contractor, you can avoid batteries altogether with hardwired LED lighting. This will connect your lighting to a switch so you can easily control it whenever you need it. It’s also a great solution for people looking to hide their wires, as a trusted Atalanta electrical contractor will be able to make these lights look as seamless as possible.

Plugin Under Cabinet Lighting

If you’re looking for something in-between battery powered and hardwired, this may be the option for you. Plugin lighting is powered using an existing outlet in your kitchen. While this means there will be more wire exposure than a hardwired alternative, it’s also more reliable and lower maintenance than battery-powered lighting. So long as there is an existing plug socket near enough to the space you want lit, a plugin under cabinet lighting could be a good solution.

Which Solution Should I Go For?

The answer really depends on your budget and needs. If you want to go for the best quality solution that will look the most elegant, then we definitely recommend going hardwired with your under-cabinet lighting. This will give your lighting an integrated feel and ensure that you don’t have to stress about wires sticking out or battery replacements. While you will have to enlist the help of a trusted Atlanta electrical contractor, it’s certainly worth it for the elegant and seamless results you receive.

Summary

You can get under cabinet lighting in battery form, plugin, or hardwired. While battery and plugin cabinet lighting are perfectly respectable solutions for your under cabinet lighting concerns, hardwired is by far the best option to go for if you can afford it. If you’re looking to get hardwired under cabinet lighting installed in your kitchen, be sure to contact a trusted Atlanta electrical contractor.

Residential Lighting Trends

Despite what you may think, the world of residential lighting is ever-growing! The smart tech industry is finding its way into the homes of millions of happy customers, and people are looking for more ways to spice up their lighting by implementing smart tech. As well as this, there’s been a huge boost in creative uses of LED lights within the home.

If you’re searching for a new way to give some dazzle to your interior design, then look no further! We’ve rounded up a few of the latest trends in residential lighting:

LED Lighted Closets

LED lights are cheaper and more accessible than ever, so they’re finding their way into plenty of unexpected places in houses and apartments, from desk lights to ceiling fans.

A new trend has emerged that aims to light up the closet: LED lights to provide the perfect solution to the lack of light source in your closet. By installing LED lights in the closet, people can now easily find the clothing they’re looking for, all while being able to choose the perfect color to light their items up with!

If you’re a fashionista looking for a way to spruce up your clothing decisions, closet LED lights may be the residential lighting trend you have been waiting for!

Smart Controls

Everyone’s been there: you’re tucked up, ready for bed, until you realize that you’ve left the lights on, and the light switch is on the other side of the room! Smart controls have become increasingly popular over the last few years to fix problems just like this. From the comfort of their bed, consumers can easily turn their lights off and on from their phone or a dedicated controller.

This year, tech-savvy consumers have gotten more creative with their use of smart lighting. A common trend for 2022 is smart light presets. By making all the lights smart controlled, you can make it, so one button changes all the lights in the room!

Perhaps you have a ‘party’ button that will dim your lamps, get your LEDs flashing, and even turn on the speaker in the corner! Or maybe you have an ‘evening wind down’ button that will dim all your lights and change the main light to a warm color which is easy on the eye. The possibilities are endless with light presets, a residential lighting trend that will take the world by storm this year!

Conclusion

With the introduction of smart tech and more accessible LED lighting, residential lighting has opened avenues to a whole world of exploration! So if you want your house or apartment to feel like 2022, why not try sprucing up your closet with some subtle LED lights.

If you’re feeling extra futuristic, throw yourself into the smart tech lighting world and set yourself up with some great light presets that will be sure to entertain any guests and make your life convenient. Now has never been a more ideal time to explore all the new trends that residential lighting has to offer!  See our customer reviews and contact us about your lighting needs today.

 

Local Electrician offers Tips for hiring an Atlanta Residential Electrician

licensed electrician working

Although there are a lot of resources out there for the DIY electrician, there are numerous benefits when working with a licensed electrician who’s also specialized as a residential electrician.

First, a lot of technical knowledge is needed, and it can really help smooth over the entire end-to-end process of whatever the licensed electrician is there for.

They are highly experienced

Before they can even consider becoming a residential electrician or a licensed electrician, they need to go through extensive training just to be approved to start their journey.

This course is around 100 hours, and once they are qualified with the book portion of being an electrician, they can start their path of becoming an apprentice, then a journeyman, and a master level of skill. To be either a journeyman or master requires several thousand hours of practical experience.

It’s not a clean job

Being a licensed electrician means going into the guts and foundation of the house to get to where the wiring is. You might feel that putting in a new electrical socket or light switch is all a residential electrician may do, but the real work comes in where all the dirt, cobwebs, and dust are behind the scenes.

They’ll need to get there and either fix wires on the spot or need to re-wire throughout the entire home.

You’re covered with a licensed electrician

Another thing about residential electricians is that they will always stand by their work. As long as you’re working with a professional contractor that has the right types of insurance, whatever electrical wiring or job a licensed electrician performs, insurance will cover any significant mishaps in most cases.

Regardless of insurance, many professional licensed electricians will come back and check on their work to confirm that they did the best job possible.
They’ll also ensure to get the proper building permits that may be needed (depending on the State) and will make sure that their wiring job complies with any types of building or municipal codes at the same time. This is another headache you can easily avoid when working with a licensed electrician.

It will save you money in the long run

Although it may seem as if a residential electrician comes in, does the job quickly, and charges you a significant amount, it’s well worth it. That’s an investment into your electricity at your home that can make everything run smoothly, keep your home safe and give you the correct power needs you require.

You want to also make sure when selecting the right type of licensed electrician that they have a good reputation and good reviews to go with everything. This way, you’ll be in safe hands for someone handling your wiring through this residential electrician.

Understanding similar past work and how they were able to handle it goes a long way to a successful residential electrician doing the job right the first time.

Please see our reviews and contact us for help with your residential electrical services.

Important reasons for hiring a licensed electrician

licensed electrician rewiring home

Sometimes you might head online and watch a few videos and think that you’re ready to handle a complete rewiring or new wiring in your home. Often this is the result of electrical wiring issues you notice around your home. You may think it’s straightforward, you get to use some cool tools, and you’ll have a functioning wired home before you know it. It’s not as simple as that. Let’s look at a few of the reasons that make hiring a licensed electrician perhaps a better option.

It’s a dirty job

Doing electrical work means getting into the guts of the home. You’ll be navigating between the walls, under the floorboards, and through the attic as you start to gut out and pull the old wire while replacing it with new wire.

This can be hazardous and dangerous work, and for your own safety, you’re better off working with a professional when it comes to this. Also, no one wants to be diving into these dirty, out of sight areas.

Being an electrician is a highly-skilled role

To become a licensed electrician means going through thousands of hours of on-the-job training and around 100 hours of classroom training. That’s a lot of experience needed just to be approved.

This is because there’s a certain way to handle electrical wiring, and there are a lot of things that can go wrong. Due to the danger of getting electrocuted or potentially causing a fire hazard, working with a professional licensed electrician is always a good idea.

They also know all the right tips and tricks to even possibly save you money with their experience.

They’re worth the price

Sometimes we do DIY to save costs, more than feeling that sense of accomplishment. What a licensed electrician may cost well outweighs what it might cost if you don’t use one.

Consider an electrical malfunction happening in your home, causing damage, burnouts, fires, and the like. If you do it yourself or your unlicensed handyman friend does it, insurance will most likely not cover you for it.

Another reason you’ll consider their price point is the fact that they’re actually going to save you a lot of time. Many licensed electricians can work quickly with whatever the job entails, can read circuitry maps faster, and can do the installation job with expediency.

You’ll also not need to go to get the building permits to do the work, or to handle the inspection after the fact, as a licensed general electrician will also handle all that and be able to stand by their work.

You’ll have your wiring done right

A licensed electrician will know things a lot better than you will, and thus they will do their work correctly the first time. On the off chance that doesn’t happen, many licensed electricians will come back and correct any issues as they’ll stand by their work.

Doing it yourself or with those friends will mean learning as you’re going and making mistakes (that can be costly) along the way. So unless you’re extremely dedicated to learning about wiring your home, go with a highly reviewed licensed electrician every single time.

Things you should know before buying an electric car

It’s a growing trend these days. Especially with gas prices hitting astronomical highs recently, an electric car seems like a wise investment. The pricing of these cars has also become affordable in many cases, and numerous car manufacturers are launching their own version of an electric vehicle.

It also does wonders to help with the environmental impact, as electric cars are much friendlier in that area and require less maintenance than traditional fossil fuel-based cars. Yet you should consider some elements before buying an electric vehicle.

Those costs can creep up on you

Many states make a portion of their revenue from the gasoline tax, and buying an electric car means less gasoline being used. That means they’ll try to make it up in some states by placing a higher tax on electric vehicle sales or requiring additional steps, such as in the State of Texas.

But, in addition, you’ll still need electricity, which can come at a cost, which is also going up. Hence, it’s essential to not simply eliminate gas costs and not include how much it’ll cost in electricity when looking to make a comparison.

The Stated vs. Actual distance per charge

Remember you’re reading advertising when you see the range and results. When you see claims such as up to x number of miles, those are in perfect road conditions with a new battery. That means a flat paved excellent road with no incline, at miles per hour, to maximize the distance.

Batteries deteriorate as we see in our smartphones and will eventually not hold as high a charge as they did when new. There’s also no wind or adverse weather conditions that make us vary our driving styles for safety. It’s always good to check with actual owners of electric vehicles to compare distances properly.

Public Charging Stations

There are two items here. The first item is that you want to make sure you’re aware of where your local public charging stations are. Not only within your city but also if you plan on doing any cross-country traveling.

Although the amount of public charging stations is increasing, they’re still not at a level where we don’t need to plan our route ahead of time.

The second component is that these charging stations are used for commercial applications. That means they’re big, fast, and can overcharge your vehicle. Just like you want to have a proper wattage with your laptop, you also want to ensure that you’re not degrading and burning the battery through overcharging.

Still a good buy

Keep in mind that this is just to check out some items beforehand, and the infrastructure for electric cars is constantly improving. Plus, we mentioned there might be additional taxes for electric vehicles, yet at the same time, there could be real incentives from certain states when buying an Electric car. As with any significant purchase, bide your time to do extensive research before taking action to buy. Have questions about charging stations? Contact McCall, a trusted metro Atlanta electrician.

 

Signs of Poor Electrical Wiring in a House

electrical wiring in wall

Being a homeowner imposes numerous obligations about housekeeping and maintaining. We can manage many basic repairs around our houses, but some house jobs just require the knowledge and expertise of a skilled and licensed professional. Many homes in America are built more than 40 years ago, so the chance to get poor electrician wiring is pretty high. When most of the work is hidden behind the walls, it may be challenging to renovate old wiring or just keep it safe. What are the common signs of poor electrical house wiring and when you have to call for an Atlanta electrician?

Smoky Smell or Burning

Have you ever felt any unpleasant smell from burning outlets in the house? It is easy to pinpoint fire harm by melting plastic near an outlet or smoky plastic smell in residence. Unplug all the electrical gadgets from an outlet and turn off the breaker if you feel this smell. Next, call the local electrical contractor to check the house wiring as soon as possible. Houses that were built more than 40 years ago have many common problems. It is rather popular to place electrical wiring outside the walls in modern houses.

Chewed or Frayed Wiring

Chewed or frayed wiring is the indicator not only of some nasty rodents in your house, but it may cause more severe problems. Wiring is always covered by protective plastic. When it is broken, the wires inside are exposed, and the electrical circuit is open. Open wires make electricity arcing. And it is dangerous as it produces electrical fires and shocks.

Hot Electrical Outlet

We recommend keeping an eye for darkened, scorched, or hot electrical outlets, as it is usually the result of broken or open wires in walls. Hot outlets and wires are typically heated up by an energy leak. It is hazardous for old houses as it may cause natural fires, and an electrical surge could fry utensils.

Flickering LIghts

In old houses, lights can buzz, dim, or flicker without any reason. If you plug in some kitchen or home utensils and notice that lights flicker, it means that the flow of electrical current is not ok. When you turn the lights on, you may also hear some buzzing and switching sounds that indicate as well wiring problems inside the house. It is the right time to call an Atlanta electrician who will solve all the wiring problems in a short time.

Circuit Breakers Tripping Frequently

Standard breakers usually do not trip. That is their primary function. They have to stop electrical flow when the wiring is overloaded. Nevertheless, if protection breakers are repeatedly tripping, first of all, you have to decrease the number of gadgets used in this circuit. The following measure is to take away the circuit breaker. If any of those actions settle the problem, it is just time to make a call to the electrical contractor as the wiring framework should be checked to avoid a fire gamble. Sometimes it may also happen when the circuit is just overwhelmed by a too significant amount of high-energy appliances. Fixing electrical wiring can be dangerous a dangerous task. We recommend contacting a highly reviewed electrician to assist.

 

The Best Home Automation Systems to Incorporate into Your Home Security

Home automation is a must-do if you have a security system. It brings so much comfort to your life. Imagine that you can change the temperature at home, switch the light on and off, and see who’s at the door while dining with friends or flying to Ukraine on a business trip.

The word ‘smart’ is put before almost every device name now. The future is here! And building a smart home isn’t a challenge if you know what to include on the list.

We can cover you security-wise because there’s a basic set that should be in every home.

Smart Cameras

Such devices are an essential part of any home security system. They work using a Wi-Fi connection and can be controlled remotely. They save footage to a cloud where you can view it anytime.

Many cameras also offer an online broadcast. Of course, the quality is much better than, say, 10 years ago, and there’s even a face recognition function. They have motion detectors and a wide angle for the best view of your yard and rooms.

Smart Doorbells

A small camera installed into a doorbell that works whenever someone approaches your house and rings is a treasure. You don’t even have to get up – watch the video on your smartphone.

These bells work differently, depending on the company you choose, but you can even get an alert on your phone that someone’s at the door.

To get the most benefit, look for motion detection, 2-way audio, and high-quality video.

Smart Locks

Lock and unlock your door anywhere using a smartphone. You don’t need keys anymore. People often forget those at home or lose somewhere. While you can also lose a phone, it’s less likely. And you can always block the access by contacting the home security system company.

Some locks work automatically when they detect your phone. So, you may not need to even take it out of your pocket and open the app.

Smart Lights

LED bulbs work for thousands of hours and help you save on electricity. But did you know they are also smart now? You can switch them on and off, dim them and choose a color. This can aid security because you can go on vacation forgetting to switch off the main lights. Or if you want people to think someone’s inside, you can turn the bulbs on and off every evening while away.

Smart Thermostat

Save on electricity by changing the thermostat settings from your phone. If something happens to it, you can switch it off quickly and call a technician, even if you’re far away. Just unlock the door for them and watch an online video from the room where the thermostat is if you don’t trust the person.

Automate Home Security to Protect Yourself, Family, and Property

Home security automation will ensure that your house is secured when you’re elsewhere in the world. Schedule lights to turn on and off, thermostat to maintain a certain temperature, and watch video footage whenever you want. It’s very convenient and opens new possibilities for home protection.

Automatic alarms will call emergency services that will take care of your property while you’re abroad or at work. You’ll get notifications about people coming to your door. The possibilities are limitless!

Home Electrical Safety Tips for Fall

electrician tools

Did you know that almost half of fire department calls report accidents caused by electricity? To be more precise, electricity isn’t the culprit, but people that neglect routine checks are.

As fall is getting closer, another regular inspection has to be done. We know exactly what there is to check. Do it diligently and carefully, and make sure to call professionals if all these wires don’t make any sense.

While there are many conditions that can be detected by someone who doesn’t know a lot about electrical applications, only a true pro electrician will notice the smaller, yet equally important, errors.

We’re going to use more appliances soon, so here are some recommendations.

1: Check All Plugs’ and Cords’ Condition and Placement

The first electrical safety tip concerns cords and plugs. You have to look for:

  • Damage of any kind;
  • Exposed wires;
  • Broken parts or elements not in place.

Call a licensed electrician if something looks suspicious. If you don’t have experience, it’s better not to touch the wires. 

Now, about the placement. Here are some guidelines that will help you understand if everything’s fine for fall:

  • There have to be water-resistant extension cords in all areas in your house and outside where it gets dump;
  • The cords shouldn’t be under carpets or near doors (you can close the door and damage the wire);
  • Extension cords shouldn’t be used as permanent outlets. If you need some, it’s better to ask a pro to install them where you need;
  • Every heavy-use appliance must be plugged into wall outlets.

2: Check All Appliances’ Condition and Placement

One of the essential electrical safety tips is to check all appliances, especially those responsible for heating. Make sure they are:

  • Intact;
  • Placed properly;
  • Have an official seal from CSA, UL, or another lab.

As to the placement, don’t put any heating devices near flammable objects. This includes not only heaters but coffee machines, toasters, etc. Appliances a like toaster, hairdryer, kettle, etc. should be plugged off after use.

3: Check All Lighting in the House

Check your lamps, as you’re going to use them much more as the sun goes down earlier. See if all lamps are below the limit mentioned on the light itself. LED lights are an amazing solution since they are very effective, save power (and money), and aren’t as dangerous as other types.

Keep the lights at least 1 ft away from flammable items like paper, curtains, etc.

Bonus: Additional Precautions

Here are some additional electrical safety tips:

  • Inspect your detectors to make sure they work properly for movement, smoke, and carbon monoxide;
  • Inspect every portable heater you have and never use them in the bathroom;
  • Check devices for outside use. If they aren’t suitable for that, consider buying other models.

Don’t neglect routine checks of electrical appliances in your house. Safety recommendations are given not to take your time from other important stuff. Specialists provide them to make sure every home is safe as the temperature goes down.

We want your golden autumn and cheerful winter to be warm and stress-free. So, go over the recommendations again and consider calling a professional to come over and inspect the house.

Energy Saving Tips You May Not Have Thought About

energy savings light bulb with a leaf inside

The rapid change of climate brings its inconveniences. We notice them the most in the summer months when it seems there’s no air to breathe, only steam and fire. Gladly, there’s air conditioning and dehumidifying tech that saves us. But it doesn’t save our finances.

That being said, you don’t have to freeze or boil to achieve considerable electricity savings, working hard on your power of will not to switch the A/C on. There are easier, more convenient ways.

Maintain Your A/C Regularly

Maintenance shouldn’t be performed only to make appliances work for a longer time. First of all, the efficiency of their operation depends on how good their condition is. Call a technician every now and then to look at your A/C and update/upgrade its parts.

And don’t forget to check the air filter with every maintenance session. This part alone can save you up to 15% of the power the A/C is using to heat or cool the room. A dirty filter slows the capacity of the appliance, thus increasing electricity bills.

Seal Your House (Works for Summer Too)

Sealing your house isn’t only effective for the cold months. Cool air also tends to escape through the same pathways as the warm air in winter. Seal your home, and you’ll need much less heating or cooling.

Aside from the main living part of the house, make sure to check the attic and basement. Most of the time, the most dramatic leaks occur there.

This will allow for considerable electricity savings throughout the year, which you should aim for.

Change Regular Bulbs to LED Ones

LED lights are the deciding factor when it comes to cutting electricity costs. They use 75% less energy than regular bulbs and last 25+ times longer. There are savings all around if you’re opting for LEDs.

Did you know that common incandescent bulbs only use 15% of the power to light your house? And do you know where the other 85% are going? Almost all of that power goes into heat. As a result, you can’t cool the room down without excess energy use, and you waste a lot on the actual lighting. LEDs solve all those issues.

Unplug Everything You Don’t Use

When not in use, every appliance has to be not only turned off but unplugged. Each one generates just a little bit of heat when plugged in. While a single charger won’t heat the house much, when you add up everything that’s been in use, you’ll see a difference in several degrees.

Buy a Smart Thermostat

Smart tech can save you a lot of money. A smart thermostat will make it easier to manage the temperature at home, automatically adjusting settings when needed. As local governments encourage installing such technology, you can find lots of options for sale, which will save you even more.

Use every appliance wisely, keep in mind the heat they are producing. Switch everything off when you leave home and change regular technology for smart, LED, etc. At the end of the day, you’ll have electricity costs cut without lots of effort while living a comfortable life in the microclimate you find the most suitable for you and your family.